carbon fiber heat tube 360mm 1000w infrared carbon fiber heating lamp

July 17, 2026

Let’s talk about the 360mm 1000W Carbon Fiber Lamp

When you need heat—and you need it now—most standard heaters just can’t keep up. That’s why we built this 360mm carbon fiber tube. It’s designed for those tight spots where you need a massive punch of infrared heat without taking up half the room.

The balance of power

At 1000W, this thing packs a serious punch. We settled on the 360mm length for a reason. If you try to cram too much power into a tiny tube, you’re basically asking the filament to burn out. We found this specific sweet spot. It gets up to temperature almost instantly, but it doesn’t stress the quartz glass to the breaking point. It just works.

Why carbon fiber?

Most people are used to those old-school nichrome coils. They’re fine, but they’re slow. We went with carbon fiber because it emits short-wave infrared. Instead of just warming the surface of your material, the heat actually sinks deep inside. Plus, we wrapped the filament in high-purity quartz. This means you can flick it on and off repeatedly without the glass cracking from the sudden temperature swings. It’s lighter. It’s faster. There’s no annoying “thermal lag” while you wait for the element to warm up.

A few things to keep in mind

If you’ve got a 360mm slot in your machinery, this should slide right in. Just a heads-up: check your controller. Carbon fiber has a specific way of drawing power when it first kicks on, so make sure your gear can handle that initial surge. But here’s the real talk:this lamp is powerful. Because it’s 1000W in a relatively small package, it can get too hot if your part just sits there. If your conveyor stops or your timing is off, you’re going to scorch your material. Play around with your distance and dwell time to get it just right. And for heaven’s sake, check your cooling fans. If they’re too weak, the rest of your housing is going to soak up all that ambient heat, and that’s a headache you don’t want.