We built this 775mm, 2000W carbon fiber infrared heating lamp for one reason: to give you intense, focused heat in a space-conscious package. It’s the kind of tool that thrives on the factory floor, where speed, consistency, and uptime aren’t nice-to-haves—they’re the whole point.
Power, size, and the electrical reality
That 2000W rating on a 775mm tube isn’t random. It packs serious heat density right where you need it, so you get fast temperature ramp-up and shorter cycle times. The length is chosen to cover typical part profiles without forcing you to oversize everything. And we designed it for industrial duty cycles, so it can run for long stretches without the output flagging. A heads-up on the electrical side: this lamp pulls a lot of current. Plan accordingly—right wire gauge, solid terminations, and a control strategy that keeps the element within its thermal sweet spot. Run it at the rated power, and it behaves the way it was meant to. If your line voltage is shaky, expect shorter life and drift in process temperature.
Inside the design: carbon fiber filament, quartz, and R7s
Inside, the carbon fiber filament sits in a quartz envelope—chosen because it can handle high temps and has low thermal mass. The payoff? The lamp heats up fast and cools down fast, giving you tight control over the heating window. That responsiveness matters when your parts need a very specific thermal profile. We use an R7s connector, the standard double-ended interface that makes this a straightforward drop-in replacement in many industrial fixtures. The contacts are built to carry the current reliably, and the mechanical retention stays solid even with vibration and thermal cycling. If your fixture is R7s-compatible, installation is simple: line it up, seat it, and lock it.
Where it shines—and what to keep in mind
Use this lamp when you need rapid, localized heating—plastic thermoforming, coating curing, adhesive activation, composite preheating. The infrared output hits the target surface directly, so you’re not wasting energy heating the air. Just be mindful: 2000W means serious heat density. Make sure your reflector, fixture, and enclosure can handle the thermal load, with proper heat resistance and ventilation. Set it up right, and you get repeatable heating, predictable cycle times, and fewer burnouts because the operating conditions stay controlled. If your process needs a fast-response, high-output heat source in a standard 775mm length, this carbon fiber infrared lamp is a practical, field-proven choice.